1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com lf0005_sc ? 6/16/2014 benefts ? wide variety of sizes and specifcations ? inductances up to 8 mh ? rated currents up to 30 a ? dc resistances as low as 6 m overview the kemet sc coils, standard type ac line flters are offered in a wide variety of sizes and specifcations. applications ? consumer electronics ? common mode choke ac line filters sc coils, standard type part number system sc- 10- 200 type rated current (a) minimum inductance (mh) sc- 0x- = x a (e.g., 02- = 2 a) x0- = x0 a (e.g., 10- = 10 a) xx- = xx a (e.g., 15- = 15 a) note: code 05 can equal 5 a as well as 4 a x00 = x mh (e.g., 200 = 2 mh) note: 1 mh can equal code 100 as well as code 101 ac line filters 12 common mode rated voltage: 250vac/vdc withstanding voltage: ac2400v (2sec. between lines) insulation resistance: at 500vdc, more than 100m (between lines) thermal class: a (105?c) operating temperature range (?c): ?25 to t (t=105?temperature rise) pin pitch listed above are reference only. not guara nteed values. inductance measurement condition:100khz, 1ma, kc547 shape and dimensions [mm] sc coils vertical type ( ~5a ) sc coils horizontal type sc-02-101 40 6 sc-02-100 40 6 sc-02-200 40 6 sc-02-300 40 6 sc-02-500 45 6 sc-02-800 40 7 sc-05-100 40 6 sc-05-200 40 7 2 2 2 2 2 2 5 5 23.0 23.0 23.0 27.0 27.0 34.0 25.0 32.0 110 100 110 100 100 150 50 70 1 1 2 3 5 8 1 2 15 15 15 16 20 25 20 25 11 17 17 17 17 20 17 21 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 13.0 18.5 18.5 20.0 20.0 23.0 18.5 22.0 sc-05-500 50 7 4 34.0 80 5 30 21 0.8 23.0 sc-05-800 60 7 4 34.0 85 8 40 21 0.8 23.0 sc-10-100 40 22 10 34.0 20 1 40 21 1.3 24.0 sc-10-200 40 30 10 47.0 28 2 80 30 1.3 27.0 sc-15-100 40 35 15 49.0 12 1 100 35 1.8 27.0 SC-15-200 45 35 15 50.0 12 2 110 35 1.8 28.0 sc-20-100 45 40 20 60.0 8 1 135 40 2.3 30.0 sc-30-100 40 55 30 62.0 6 1 190 20 2.6 35.0 model dc resistance (m /line) max. temperature rise(k) max. inductance (mh) min. wire size (mm?) pin pitch (reference) weight approx. (g) od (max.) finished dimensions(mm) t (max.) ab rated current (a) t od (a) 2 4 3 (b ) 1 od 13 42 t (b) 12 34 (a) mounting pitch (10a ) sc coils ? standard type [rohs compliant] sc coils ? standard type [rohs compliant] 152.0 152.0 one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com lf0005_sc ? 6/16/2014 dimensions C millimeters vertical type ( 5 a) t od (a) 2 4 3 (b ) 1 od 1 3 4 2 t (b) 1 2 3 4 (a) 15 2.0 15 2.0 0 r x q w l q j 3 l w f k t od (a) 2 4 3 (b ) 1 od 1 3 4 2 t (b) 1 2 3 4 (a) 15 2.0 15 2.0 ( q y l u r q p h q w d o & r p s o l d q f h all kemet ac line filters are rohs compliant. horizontal type ( 10 a) ac line filters C sc coils, standard type
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com lf0005_sc ? 6/16/2014 table 1 C ratings & part number reference 1 pin pitch listed above for reference only. values not guaranteed. specifcations item sc rated voltage 250 vac/vdc withstanding voltage 2400 v (2 seconds, between lines) insulation resistance > 100 m @ 500 vdc (between lines) thermal class a (105c) operating temperature range -25oc to t (t = 105 - temperature rise) inductance measurement condition 100 khz, 1 ma, kc547 attenuation (static characteristics) and circuit diagram part number rated current ac (a) inductance (mh) minimum dc resistance/ line (m) maximum temperature rise (k) maximum finished dimensions (mm) pin pitch 1 (reference) wire diameter (mm) weight (g) approximate od (maximum) t (maximum) a b sc-02-101 2 1 110 40 23.0 13.0 6 11 0.6 15 sc-02-100 2 1 100 40 23.0 18.5 6 17 0.6 15 sc-02-200 2 2 110 40 23.0 18.5 6 17 0.6 15 sc-02-300 2 3 100 40 27.0 20.0 6 17 0.6 16 sc-02-500 2 5 100 45 27.0 20.0 6 17 0.6 20 sc-02-800 2 8 150 40 34.0 23.0 7 20 0.6 25 sc-05-100 5 1 50 40 25.0 18.5 6 17 0.8 20 sc-05-200 5 2 70 40 32.0 22.0 7 21 0.8 25 sc-05-500 4 5 80 50 34.0 23.0 7 21 0.8 30 sc-05-800 4 8 85 60 34.0 23.0 7 21 0.8 40 sc-10-100 10 1 20 40 34.0 24.0 22 21 1.3 40 sc-10-200 10 2 28 40 47.0 27.0 30 30 1.3 80 sc-15-100 15 1 12 40 49.0 27.0 35 35 1.8 100 SC-15-200 15 2 12 45 50.0 28.0 35 35 1.8 110 sc-20-100 20 1 8 45 60.0 30.0 40 40 2.3 135 sc-30-100 30 1 6 40 62.0 35.0 55 20 2.6 190 ac line filters 13 common mode attenuation (static characteristics) and circuit diagram frequency characteristic 40 50 60 70 80 90 100 without sc coil without sc coil with sc coil with sc coil terminal voltage (db) 1 v=0 db frequency (mhz) a. switching power supply 0.5 1.0 2.0 40 50 60 70 80 90 100 terminal voltage (db) 1 v=0 db frequency (mhz) b. motor 0.5 1.0 2.0 circuit circuit load load cy l l cy cx cx cy l : sc-02-100 cx : 0.1 f cy : 4700 pf l : sc-05-100 cx : 0.1 f cy : 4700 pf cy 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 0 2 -2 0 0 0 2 -1 0 1 0 2 -1 0 0 02-200 02-101 02-100 0 2 -5 0 0 0 2 -8 0 0 0 2 -3 0 0 02-500 02-800 02-300 0 5 -5 0 0 0 5 -1 0 0 0 5 -2 0 0 0 5 -8 0 0 05-500 05-100 05-200 05-800 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1 0 -1 0 0 1 0 -2 0 0 2 0 -1 0 0 10-100 10-200 20-100 1 5 -1 0 0 1 5 -2 0 0 3 0 -1 0 0 15-100 15-200 30-100 ac line filters C sc coils, standard type
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com lf0005_sc ? 6/16/2014 frequency characteristics notes on use shelf life ? use within 6 months. if the product is used after a storage period of 6 months or longer, confrm its solderability before use. storage condition ? avoid storage in high temperature and high humidity environment, as such condition may deteriorate the solderability of external electrode. ? avoid storage in atmosphere containing toxic gases or acid (e.g., sulphur and chlorine), as such gas may deteriorate the solderability of external electrode. ? avoid storage near strong magnetic feld, as such condition may magnetize the product. ac line filters 13 common mode attenuation (static characteristics) and circuit diagram frequency characteristic 40 50 60 70 80 90 100 without sc coil without sc coil with sc coil with sc coil terminal voltage (db) 1 v=0 db frequency (mhz) a. switching power supply 0.5 1.0 2.0 40 50 60 70 80 90 100 terminal voltage (db) 1 v=0 db frequency (mhz) b. motor 0.5 1.0 2.0 circuit circuit load load cy l l cy cx cx cy l : sc-02-100 cx : 0.1 f cy : 4700 pf l : sc-05-100 cx : 0.1 f cy : 4700 pf cy 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 0 2 - 2 0 0 0 2 - 1 0 1 0 2 - 1 0 0 02-200 02-101 02-100 0 2 - 5 0 0 0 2 - 8 0 0 0 2 - 3 0 0 02-500 02-800 02-300 0 5 -5 0 0 0 5 -1 0 0 0 5 -2 0 0 0 5 -8 0 0 05-500 05-100 05-200 05-800 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1 0 -1 0 0 1 0 -2 0 0 2 0 -1 0 0 10-100 10-200 20-100 1 5 -1 0 0 1 5 -2 0 0 3 0 -1 0 0 15-100 15-200 30-100 ac line filters 13 common mode attenuation (static characteristics) and circuit diagram frequency characteristic 40 50 60 70 80 90 100 without sc coil without sc coil with sc coil with sc coil terminal voltage (db) 1 v=0 db frequency (mhz) a. switching power supply 0.5 1.0 2.0 40 50 60 70 80 90 100 terminal voltage (db) 1 v=0 db frequency (mhz) b. motor 0.5 1.0 2.0 circuit circuit load load cy l l cy cx cx cy l : sc-02-100 cx : 0.1 f cy : 4700 pf l : sc-05-100 cx : 0.1 f cy : 4700 pf cy 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 0 2 -2 0 0 0 2 -1 0 1 0 2 -1 0 0 02-200 02-101 02-100 0 2 -5 0 0 0 2 -8 0 0 0 2 -3 0 0 02-500 02-800 02-300 0 5 - 5 0 0 0 5 - 1 0 0 0 5 - 2 0 0 0 5 - 8 0 0 05-500 05-100 05-200 05-800 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1 0 - 1 0 0 1 0 - 2 0 0 2 0 - 1 0 0 10-100 10-200 20-100 1 5 -1 0 0 1 5 -2 0 0 3 0 -1 0 0 15-100 15-200 30-100 ac line filters 13 common mode attenuation (static characteristics) and circuit diagram frequency characteristic 40 50 60 70 80 90 100 without sc coil without sc coil with sc coil with sc coil terminal voltage (db) 1 v=0 db frequency (mhz) a. switching power supply 0.5 1.0 2.0 40 50 60 70 80 90 100 terminal voltage (db) 1 v=0 db frequency (mhz) b. motor 0.5 1.0 2.0 circuit circuit load load cy l l cy cx cx cy l : sc-02-100 cx : 0.1 f cy : 4700 pf l : sc-05-100 cx : 0.1 f cy : 4700 pf cy 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 0 2 -2 0 0 0 2 -1 0 1 0 2 -1 0 0 02-200 02-101 02-100 0 2 -5 0 0 0 2 -8 0 0 0 2 -3 0 0 02-500 02-800 02-300 0 5 -5 0 0 0 5 -1 0 0 0 5 -2 0 0 0 5 -8 0 0 05-500 05-100 05-200 05-800 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 3 61 3 61 3 61 3 61 3 1 0 -1 0 0 1 0 -2 0 0 2 0 -1 0 0 10-100 10-200 20-100 1 5 - 1 0 0 1 5 - 2 0 0 3 0 - 1 0 0 15-100 15-200 30-100 ac line filters C sc coils, standard type
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com lf0005_sc ? 6/16/2014 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-306-9353 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishops stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. ac line filters C sc coils, standard type
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com lf0005_sc ? 6/16/2014 disclaimer this product has been made available through a private label agreement and a development and cross-licensing agreement between kemet and nec tokin to expand market and product offerings for both companies and their respective customers. for more information, please visit http://www.kemet.com/nectokin. all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. ac line filters C sc coils, standard type
|
